Skip to content
Aquaflow 160mm Single Socket 45° Bend
Key Product Benefits
- 160mm single socket 45 degree bend for above ground soil and waste drainage
- Creates a smooth intermediate change of direction
- Single socket design for connection to standard pipework
- Manufactured from robust uPVC for lasting reliability
- Smooth internal profile aids consistent flow
- Compatible with standard 160mm drainage pipes
160mm Single Socket 45 Degree Bend
The 160mm single socket 45 degree bend is designed for use in above ground soil and waste drainage systems where a moderate change of direction is required. This fitting allows pipe runs to adjust smoothly while maintaining reliable flow characteristics, making it an excellent choice for a range of drainage layouts.
Constructed from high quality uPVC, this bend offers strength and resistance to corrosion and moisture. The smooth internal bore ensures efficient passage of waste through the system, helping to prevent build-ups and maintain consistent performance.
160mm Single Socket 45 Degree Bend – Key Features & Benefits
- 45 degree angle for moderate directional adjustment
- Single socket end for direct pipe insertion
- Durable uPVC construction for long life
- Smooth inside surface to support uninterrupted flow
- Suitable for use with standard 160mm soil and waste pipes
- Resistant to corrosion and environmental wear
Installer Benefits
- Push fit socket simplifies installation
- Reduces the need for additional fittings
- Lightweight and easy to handle on site
- Compatible with sealing rings for watertight joints
- Adaptable for varied above ground drainage configurations
Size Available
- 160mm diameter
Performance & Durability
Made from strong uPVC, this 45 degree bend provides excellent performance in above ground drainage systems. The material withstands moisture and environmental exposure, making it suitable for both residential and commercial installations.
The internal bore remains smooth to encourage efficient waste movement and reduce the likelihood of blockages. When installed using compatible pipework and seals, this fitting contributes to a dependable drainage layout with minimal ongoing maintenance.
Installation
Ensure that pipe ends are clean before assembly. Fit the correct sealing ring into the socket and apply a small amount of lubricant if required. Insert the pipe fully into the socket to achieve a secure joint, following current building regulations and drainage best practice.
Product Specifications
- Material: uPVC
- Diameter: 160mm
- Angle: 45 degrees
- Connection Type: Single socket
- Application: Above ground soil and waste systems
- Colour: Terracotta
| Brand | Aquaflow |
|---|---|
| Google Category | Hardware > Plumbing > Plumbing Fixture Hardware & Parts > Drain Components |
| Product Type | Underground Drainage > 160mm Underground Drainage > Aquaflow 160mm Underground 45° Single Socket Bend |
| Pipe Diameter |
£21.00 (£17.50 + VAT)
Aquaflow 160mm Single Socket 45° Bend
Key Product Benefits
- 160mm single socket 45 degree bend for above ground soil and waste drainage
- Creates a smooth intermediate change of direction
- Single socket design for connection to standard pipework
- Manufactured from robust uPVC for lasting reliability
- Smooth internal profile aids consistent flow
- Compatible with standard 160mm drainage pipes
Description
160mm Single Socket 45 Degree Bend
The 160mm single socket 45 degree bend is designed for use in above ground soil and waste drainage systems where a moderate change of direction is required. This fitting allows pipe runs to adjust smoothly while maintaining reliable flow characteristics, making it an excellent choice for a range of drainage layouts.
Constructed from high quality uPVC, this bend offers strength and resistance to corrosion and moisture. The smooth internal bore ensures efficient passage of waste through the system, helping to prevent build-ups and maintain consistent performance.
160mm Single Socket 45 Degree Bend – Key Features & Benefits
- 45 degree angle for moderate directional adjustment
- Single socket end for direct pipe insertion
- Durable uPVC construction for long life
- Smooth inside surface to support uninterrupted flow
- Suitable for use with standard 160mm soil and waste pipes
- Resistant to corrosion and environmental wear
Installer Benefits
- Push fit socket simplifies installation
- Reduces the need for additional fittings
- Lightweight and easy to handle on site
- Compatible with sealing rings for watertight joints
- Adaptable for varied above ground drainage configurations
Size Available
- 160mm diameter
Performance & Durability
Made from strong uPVC, this 45 degree bend provides excellent performance in above ground drainage systems. The material withstands moisture and environmental exposure, making it suitable for both residential and commercial installations.
The internal bore remains smooth to encourage efficient waste movement and reduce the likelihood of blockages. When installed using compatible pipework and seals, this fitting contributes to a dependable drainage layout with minimal ongoing maintenance.
Installation
Ensure that pipe ends are clean before assembly. Fit the correct sealing ring into the socket and apply a small amount of lubricant if required. Insert the pipe fully into the socket to achieve a secure joint, following current building regulations and drainage best practice.
Product Specifications
- Material: uPVC
- Diameter: 160mm
- Angle: 45 degrees
- Connection Type: Single socket
- Application: Above ground soil and waste systems
- Colour: Terracotta
Specification
| Brand | Aquaflow |
|---|---|
| Google Category | Hardware > Plumbing > Plumbing Fixture Hardware & Parts > Drain Components |
| Product Type | Underground Drainage > 160mm Underground Drainage > Aquaflow 160mm Underground 45° Single Socket Bend |
| Pipe Diameter |
Related products
£21.00 (£17.50 + VAT)
Reviews
There are no reviews yet.