10mm Wall Panels
10mm wall panels are the thickest board in the range, rigid enough to fit onto battens or an uneven wall without following every hollow. Widths run 1000mm at 2.4m, including marble effect wall panels in stone, grey and oak. For a thinner board over tile, see 5mm wall panels.
Free delivery on orders over £150 inc VAT.
22 UK Branches
In Stock


Duraklad Wall Panel 10mm x 1m x 2.4m Chevron WhiteLength: 2.4m
£43.00Inc. VAT
View Product
Available
In Stock


White High Gloss Hygiene Wall Panel | 1000mm x 2.4m x 10mmLength: 2.4m
£43.00Inc. VAT
View Product
Available
In Stock


Quartz Anthracite Grey Wall Panel 1000mm x 2.4m x 10mmLength: 2.4m
£43.00Inc. VAT
View Product
Available
In Stock


Concrete Grey Stone Effect Wall Panel | 1000mm x 2.4m x 10mmLength: 2.4m
£43.00Inc. VAT
View Product
Available
In Stock


Carrera Marble White Grey Veined | 10mm X 1m X 2.4mLength: 2.4m
£43.00Inc. VAT
View Product
Available
In Stock


Concrete Grey Stone Effect Wall Panel | 250mm x 2.6m x 5mm (Pack of 4)Length: 5mm
£27.96/ packInc. VAT
£6.98 / panel
View Product
Available
In Stock


Full Tile Wave Matt Wall Panel | 1000mm x 2.4m x 10mmLength: 2.4m
£58.00Inc. VAT
View Product
Available
In Stock


Natural Stone Peninne Wall Panel 1000mm x 2.4m x 10mmLength: 2.4m
£43.00Inc. VAT
View Product
Available
In Stock


Natural Stone Light Grey Wall Panel 1000mm x 2.4m x 10mmLength: 2.4m
£43.00Inc. VAT
View Product
Available
In Stock


Chevron Stone Matt Wall Panel | 1000mm x 2.4m x 10mmLength: 2.4m
£43.66Inc. VAT
View Product
Available
In Stock


Chevron Grey Matt Wall Panel | 1000mm x 2.4m x 10mmLength: 2.4m
£43.66Inc. VAT
View Product
Available
In Stock


Light Grey Platinum Sparkle Wall Panel | 1000mm x 2.4m x 10mmLength: 2.4m
£41.35Inc. VAT
View Product
Available
Choosing 10mm Wall Panels
Frequently Asked Questions
5mm over existing tiles or a flat plastered wall where you do not want to lose room depth. 8mm for general use — stiff enough to bridge small hollows. 10mm where the board goes onto battens or an uneven wall and needs to hold a straight line on its own. All three take the same trims.
Panels fix either on adhesive to a flat, dry wall, or on timber battens at roughly 400mm centres where the wall is uneven. Start in a corner with a corner trim, slot each tongue into the last groove and glue or pin as you work across. Cut with a fine-tooth saw, or a sharp knife against a straight edge.
A grab or panel adhesive, run in vertical beads about 300mm apart on the back of the board, then pressed firmly to a clean, dry wall. On battens you can pin or staple instead. Avoid solvent-based adhesives — they attack PVC. Clear silicone goes in the groove separately for wet areas.
Internal corner trims where two walls meet, external corner or angle trims round an outside corner, edge or end trims where the run stops at a door, window or open wall, H-section joiners to butt two panels mid-wall, and quadrant where panels meet a bath or shower tray. Coving closes the top against the ceiling.
Our panels carry a 10-year guarantee, and with normal care they last well beyond it. There is no grout to discolour or crack, no sealant line to redo, and the colour is printed under a protective layer rather than painted on. A damaged board can be replaced on its own without disturbing the rest of the wall.















