Ogee Fascia Board
Ogee fascia board carries a moulded front face rather than a flat one, matching shaped guttering on a period property or adding relief to a plain elevation. Boards come in 9mm at 3m and 5m, in widths from 150mm to 405mm. Carries ogee guttering.
Free delivery on orders over £150 inc VAT.
22 UK Branches
In Stock
Aquacel 9mm x 150mm x 5m Ogee Fascia BoardLength: 5m·0.75 m²
£36.58Inc. VAT
£48.77 per m² Inc. VAT
View Product
Available
In Stock
Aquacel 9mm x 175mm x 5m Ogee Fascia BoardLength: 5m·0.875 m²
£37.61Inc. VAT
£42.98 per m² Inc. VAT
View Product
Available
In Stock
Aquacel 9mm x 200mm x 5m Ogee Fascia BoardLength: 5m·1.0 m²
£49.25Inc. VAT
£49.25 per m² Inc. VAT
View Product
Available
In Stock
Aquacel 9mm x 250mm x 5m Ogee Fascia BoardLength: 5m·1.25 m²
£63.29Inc. VAT
£50.63 per m² Inc. VAT
View Product
Available
In Stock
Aquacel 9mm x 300mm x 5m Ogee Fascia BoardLength: 5m·1.5 m²
£75.98Inc. VAT
£50.65 per m² Inc. VAT
View Product
Available
In Stock
In Stock
Aquacel 9mm x 405mm x 5m Ogee Fascia BoardLength: 5m·2.025 m²
£101.86Inc. VAT
£50.30 per m² Inc. VAT
View Product
Available
In Stock
Aquacel 9mm x 200mm x 3m Ogee Fascia BoardLength: 3m·0.6 m²
£29.56Inc. VAT
£49.26 per m² Inc. VAT
View Product
Available
Choosing Ogee Fascia Board
Frequently Asked Questions
9mm board is capping: it is fixed over sound existing timber to smarten the roofline without stripping back. 16mm is the full replacement thickness, strong enough to carry the guttering on its own once the old timber is off. If the timber behind is soft or rotten, capping over it only hides the problem.
Through into the rafter ends with polytop nails or stainless screws, two per rafter, at the top and bottom of the board so it cannot rotate under the weight of a full gutter. Fix into sound timber — if the rafter ends are soft they need cutting back and a new timber before the board goes on.
They do not have to, but a roofline reads as one line from the ground, so mismatched whites or a grey gutter on a white fascia tend to show. If you are replacing in stages, settle the colour across fascia, soffit, guttering and downpipe at the start rather than matching to what is already up.
Look at the front edge from the ground. A plain curve is half round, a flat face with a square shoulder is square, and a moulded, shaped front is ogee. Then measure across the top of the gutter: 112mm and 114mm are the common domestic sizes, with 125mm, 130mm and 170mm on deeper and commercial systems.