Krown Ogee Guttering
Krown ogee profile guttering supplies the angles, outlets, unions and brackets for a 125mm Krown run, matching the deeper ogee section already on the building. Brown ogee guttering fittings come in 4m lengths with 66mm square and 68mm round downpipe, matching the wider ogee guttering range.
Free delivery on orders over £150 inc VAT.
22 UK Branches
In Stock
Aquaflow 68mm Square Cast Iron Effect Downpipe Offset Bend 92.5°
£23.81Inc. VAT
View Product
Available
Choosing Krown Ogee Guttering
Frequently Asked Questions
Match three things: the profile shape, the width across the top of the gutter, and the manufacturer's system. Two 112mm half round gutters from different makers can have seals that will not grip each other. If you are repairing rather than replacing, take an offcut or a clear photo of an existing union before ordering.
Not reliably. Profiles that look alike often differ by a few millimetres across the seal, so a union from one system may not grip, or may leak, on another. Match the profile and size already on the building. If a run is being replaced piecemeal, bring an offcut or a photo of the union before ordering.
Look at the front edge from the ground. A plain curve is half round, a flat face with a square shoulder is square, and a moulded, shaped front is ogee. Then measure across the top of the gutter: 112mm and 114mm are the common domestic sizes, with 125mm, 130mm and 170mm on deeper and commercial systems.
Plastic moves with temperature — a long run can grow several millimetres between a frosty morning and a hot afternoon. Pushing every joint fully home leaves nowhere for that to go, so the run bows or pops a seal. Each union carries an insertion mark; stop at it rather than at the back of the socket.