Duraklad Double Embossed Sand Wall Cladding | 333mm x 5m x 7mm
Product Code: KEC333SND
- Weather-resistant uPVC — no painting, won't rot or corrode
- Tongue-and-groove interlock for rainproof fit
- UV-stabilised and colourfast
- Low-maintenance alternative to timber cladding
Price per pack
Don't Forget The Essentials
Product Description
Our Sand Coloured Exterior Wall Cladding is perfect for cladding the front of any home, building or exterior wall to give a more modern look. This Double Embossed Sand Wall Cladding are often used for outdoor buildings such as summerhouses and home offices. The durability and colour of our Double Embossed Sand Wall Cladding range means that you do not need to treat or stain them every year as they are made from uPVC plastic but moulded to give a wood effect.
Product Specifications
- Material: uPVC (PVC-UE foamed profile)
- Panel Width: 333mm
- Panel Length: 5m
- Thickness: 7mm
- Coverage per board: 1.665 m²
- Colour: Sand
- Reaction-to-fire: Class C–s3, d0 (BS EN 13501-1:2018)
- Warranty: 5 years
- Manufacturer: Kalsi Plastics (UK) Ltd, Birmingham
Fire Performance & Building Regulation Compliance
Independently fire-tested and CE-certified to BS EN 13501-1:2018 as a PVC-UE profile for external finishes, under EU Construction Product Regulation (EU) 305/2011.
- Reaction-to-fire class: C–s3, d0 (BS EN 13501-1:2018)
- FIGRA0.2MJ: 229.2 W/s · FIGRA0.4MJ: 203.2 W/s · THR600s: 11.1 MJ
- SMOGRA: 188.0 m²/s² · TSP600s: 535.1 m² · No flaming droplets (d0)
- Tested to BS EN 13823:2020 by BTTG / Shirley Technologies (report ref 27/06138B/04/23, May 2023)
- Manufactured in the UK by Kalsi Plastics (UK) Ltd, Birmingham — CE Conformity certificate first issued 2023
This product achieves a higher reaction-to-fire classification than leading WPC composite cladding ranges, which typically classify as Class D–s3, d2 under the same standard. For buildings over 18m in height, please confirm A2–s1, d0 requirement under Approved Document B before specifying.
Manufacturer’s Warranty
5-year manufacturer’s warranty against excessive visual degradation under normal use, issued by 3D Decorative Plastics (UK) Limited.
- Installation must follow the 3D Decorative Plastics installation guide
- Not subjected to sustained heat above 40°C
- Storage in original packaging at typical temperature (max 40°C) and humidity (RH 70–85%); not stored for longer than six months prior to installation
- Does not cover vandalism, accidental damage, or damage from inadequate storage
- Labour, replacement, removal and transport costs are not covered
Any claim must be reported to 3D Decorative Plastics within two months of the fault being identified.
Specifications
| Material | uPVC |
|---|---|
| Pack Size | 1 |